MA lighting dot2 User Manual page 35

d o t 2 U s e r Ma n u a l
When you are done the Group view should look like this:
Combination selections
With these groups we can do a lot of different combinations.
You can combine two groups simply be pressing them. If you press All FOH and then Down Stage (there's an
automatic + function), you have selected fixtures 1 to 8.
You can also use the - key to remove overlapping fixtures from a different group. If you need all the warm dimmers
except the ones from front of house (FOH), you could do it like this (do a Clear first):
All Warm Dim - All FOH
First we selected all the warm dimmers and then we removed the FOH ones from our selection.
Previous, Set and Next - the group edition
With a selection of fixtures you can use the Prev and Next keys to step through the group, just like we did when
we didn't already have a selection. The difference is that this will only step through the fixtures in the group.
Try to select group 2 (All FOH) and then press Next . This should be the result:
If you keep pressing next you see that you are just jumping through the fixtures in the group - you never select fixture
5.
35
© 2 0 1 5 MA L i g h t i n g T e c h n o l o g y G mb H - D a c h d e c k e r s t r . 1 6 - D - 9 7 2 9 7 Wa l d b ü t t e l b r u n n - G e r ma n y - w w w . ma l i g h t i n g . c o m