MA lighting dot2 User Manual page 430

Description
With the select command, you select fixtures
by DMX address
from a cue list stored on a executor
from a specific cue
The selected fixtures are displayed in the
Syntax
1. Select fixtures in the fixtures view by DMX address.
Select Dmx 1.1
2. Select all fixtures from a cue list stored on a executor.
Select ExecButton1 1.1
3. Select all fixtures in a specific cue.
Select Cue 1 ExecButton1 1.2
Example 1
Let´s assume, you will select the fixture using the DMX address 1.1.
Press Select and tap in the
The fixture with the DMX address 1.1 is selected.
Example 2
Let´s assume, you will select all fixtures from the cue list, stored on executor 1.
There are three ways to do this:
a) Press Select and then press the respective executor button e.g.
b) Press Select and then tap on executor 1 in the
c) Press Select Exec 1 Please
All fixtures stored on executor 1 are selected in the fixtures view.
Example 3
Let´s assume, you will select all fixtures from cue 1 on executor 1.
There are three ways to do this:
© 2 0 1 5 MA L i g h t i n g T e c h n o l o g y G mb H - D a c h d e c k e r s t r . 1 6 - D - 9 7 2 9 7 Wa l d b ü t t e l b r u n n - G e r ma n y - w w w . ma l i g h t i n g . c o m
d o t 2 U s e r Ma n u a l
fixtures view.
DMX view at 1.1 .
executor bar
.
.
view.
430