MA lighting dot2 User Manual page 465

Error
# 27 Syntax error
# 28 No cue source
given
# 29 Illegal cue number The entered cue number is not valid.
# 30 No default
executor
# 31 Limit exceeded
# 32 Unknown option
# 33 Destination not
empty, no copy mode
given
# 34 No cue for part
given
# 35 Edit single object
only
# 36 Too many
numbers
# 37 Copy N to M
elements not supported
# 38 Move N to M
elements not supported
# 39 Move 1 to M
elements not supported
# 40 Missing Hardware
# 41 Illegal layer
# 42 Illegal filename
# 43 Login needed
# 44 Insufficient user
rights
# 45 Not a valid clone
source
# 46 Not a valid clone
destination
© 2 0 1 5 MA L i g h t i n g T e c h n o l o g y G mb H - D a c h d e c k e r s t r . 1 6 - D - 9 7 2 9 7 Wa l d b ü t t e l b r u n n - G e r ma n y - w w w . ma l i g h t i n g . c o m
d o t 2 U s e r Ma n u a l
Reason
The entered syntax is wrong.
A cue number is missing for the source.
You have tried to access a default executor, but have not
selected one.
You are trying to exceed the limit.
The selected option does not exist.
You are trying to copy something to an occupied destination,
and you haven't specified how the console should react.
A cue number is missing and required.
You have tried to edit multiple objects, and you can only edit
one.
There are to many numbers in the command.
You are trying to copy a larger number of objects to a
smaller number of objects.
You are trying to move a larger number of objects to a
smaller number of objects.
You are trying to move one object to several destinations.
You are trying to access hardware that aren't there.
The layer you are trying to access is illegal.
The entered filename is not valid.
A login is required.
You don't have the sufficient user rights.
The source for your clone action isn't valid. There might be a
mismatch between the source and destination fixture.
The destination for your clone action isn't valid. There might
be a mismatch between the source and destination fixture.
465