MA lighting dot2 User Manual page 68

programmer right now. Press
then Color in the bar. This should remove the red markers next those. Ok, now press
one of the two keys associated with the executor. In the Store window tap where it says Remove . Now we have
removed all the unnecessary values from the cue list.
Changing it to a chaser
Now we need to change the mode of the cue list. We need to tell the console that this is now a chaser.
Press the key and then any of the keys associated with the executor where you stored the cues.
In the upper right corner of the cue window you'll see the Tool icon
This opens the settings for the executor. We also looked at this for our main executor, when we activated MIB. The
first setting looks like this:
Right now the check marker isn't filled out so it's not a chaser. Tap it once and then tap in the upper left corner
where it says Esc .
Notice that the color has changed for the executor in the Executor Bar. It now looks like this:
Try to move the fader down and then up to 100. Now your chaser starts running.
Changing the Chaser settings
If you can't see the cue list, then press the
where the chaser is running.
Now the bottom of screen 1 gives us some new chaser specific settings. They look like this:
The top half of this gives you two different settings regarding how the different cues or chaser steps should run.
Pressing the three dots on the left opens a pop-up list with four options.
Forward
- will run the steps from the one with the lowest number to the one with the highest.
Backward
- is run from the one with the highest number to the one with the lowest.
Bounce
- will begins as a forward, then when reaching the highest number it will begin to run backwards. The
result is a constant change of direction.
Random
- is choosing a random cues/step as the next one.
© 2 0 1 5 MA L i g h t i n g T e c h n o l o g y G mb H - D a c h d e c k e r s t r . 1 6 - D - 9 7 2 9 7 Wa l d b ü t t e l b r u n n - G e r ma n y - w w w . ma l i g h t i n g . c o m
d o t 2 U s e r Ma n u a l
Off and then Dimmer in the preset bar (right side, right screen) and again
key again and then any of the keys associated with executor
- Tap it.
68
Off and
Store Cue Thru and then