MA lighting dot2 User Manual page 385

delete executors from the
delete cues from executors
set the intensity of an executor
trigger an executor
Syntax
1. Select all fixtures stored on an executor.
Executor 1
2. Delete an executor from the page pool and the respective executor button on the console.
Delete Executor 1
3. Delete a cue from an executor.
Delete Cue 1 Executor 1
4. Set the intensity of an executor to 50 %.
Executor 1 At 50
5. Trigger an executor with a go.
Go Executor 1
Example 1
Let´s assume, you will select all fixtures used in the cue list of executor 1.
There are two ways to do this.
a) Press Exec 1 Please
b) Press Exec and then tap on the object tile of executor 1 .
All fixtures stored in the cue list of executor one are selected in the
Example 2
Let´s assume, you will delete executor 1 from the actual page of
There are two ways to do this.
a) Press Delete Exec 1 Please
b) Press Delete Exec
Executor 1 is deleted from the actual page of the executor pool.
Example 3
© 2 0 1 5 MA L i g h t i n g T e c h n o l o g y G mb H - D a c h d e c k e r s t r . 1 6 - D - 9 7 2 9 7 Wa l d b ü t t e l b r u n n - G e r ma n y - w w w . ma l i g h t i n g . c o m
d o t 2 U s e r Ma n u a l
page pool and the respective executor button on the console
.
.
and then tap on the object tile of executor 1 .
fixtures view.
executor pool.
385