Rate Command - MA lighting dot2 User Manual

Cue 2 of Executor 2 is in preview.
3. Repeat step 2 until you reach the end of the cue list.
Hint:
To step thru the cue list backwards, press
8.51.

Rate Command

This page describes the syntax and how to use the rate command.
To go to the rate command it is necessary to press another function key before, e.g.
Description
With the rate command you can store on an executor a:
Master Speed
Mater Rate
For more information about what is a master speed or a master rate, refer to the glossary.
Syntax
Store a master speed or mater rate on an executor.
Store Rate
Example
Let´s assume, you will store a master rate on executor 6.
There are four ways to do this:
a) Press Store Speed
b) Press Store Speed
c) Press Store Speed
d) Tap on empty executor 6 in the executor bar view. The
[Store]>[Speed]>[Executor] , then tap Master Rate .
Record Command
© 2 0 1 5 MA L i g h t i n g T e c h n o l o g y G mb H - D a c h d e c k e r s t r . 1 6 - D - 9 7 2 9 7 Wa l d b ü t t e l b r u n n - G e r ma n y - w w w . ma l i g h t i n g . c o m
d o t 2 U s e r Ma n u a l
(= Rate) Exec 6 Please
(= Rate) and press the respective executor button
(= Rate) and tap on executor 6 in the
Prvw Prev .
.
executor bar view.
empty executor window
425
Store and then Speed
.
opens. Tap
.