Call Command - MA lighting dot2 User Manual

Blind Command
8.8.
This page describes the syntax and how to use the blind command.
If you enter the blind command in the console, by press the
executed.
You can also use the command line along with the virtual keyboard and type the word blind in.
To go to the blind command press the
The command will be directly executed.
Description
With the blind command you can turn the live output of the programmer on or off.
This is useful for programming light without an actual output.
The blind command is a toggle function.
If blind is on and you press
If blind is off and you press
Syntax
Turn blind on or off.
Blind
Example
Let´s assume, you will turn blind on for further programming but you don´t want to disturb what is going on at stage.
Press Blind .
The console gives you feedback that blind is on at the bottom of screen 1.
All values in the programmer has no actual output.
Double-check the executed command in the
Related Links
Blind Key
Command Line View
What is the Programmer?
8.9.

Call Command

This page describes the syntax and how to use the
© 2 0 1 5 MA L i g h t i n g T e c h n o l o g y G mb H - D a c h d e c k e r s t r . 1 6 - D - 9 7 2 9 7 Wa l d b ü t t e l b r u n n - G e r ma n y - w w w . ma l i g h t i n g . c o m
d o t 2 U s e r Ma n u a l
Blind key on the console.
Blind , blind is off.
Blind , blind is on.
Call
Blind key, the command will be directly
command line view.
command.
366