MA lighting dot2 User Manual page 343

7.79. Timecode Configuration Window
The Timecode Configuration Window is located in the Setup, column
In this window, you can enable and disable incoming MIDI and SMPTE.
Information:
To receive timecode signals, a network session is not necessary.
If the console is part of a network session, the timecode signal can be connected to any session
member.
If more than one timecode signal is connected to the different consoles in a session, the first connected
timecode signal will be used. If the first connected timecodes signal is failed, the second connected
timecode signal will be use.
On the left side of the screen are the two available timecodes displayed.
MIDI
SMPTE
The green tick displays, that this timecode type is enabled.
The red prohibition sign displays, that this timecode type is disabled.
To enable or disable a timecode type, tap at the icon.
If timecode is connected, the received timecode is displayed below the timecode type.
If you have an external screen connected, the timecode is visible in the view bar below the clock time and date.
To leave the Timecode Configuration Window, tap
Encoder Bar Functions
Timecode
:
To select a timecode, turn the encoder left or right.
To enable or disable a timecode, press the encoder.
© 2 0 1 5 MA L i g h t i n g T e c h n o l o g y G mb H - D a c h d e c k e r s t r . 1 6 - D - 9 7 2 9 7 Wa l d b ü t t e l b r u n n - G e r ma n y - w w w . ma l i g h t i n g . c o m
d o t 2 U s e r Ma n u a l
in the title bar or press
343
Show Timecode
, .
Esc . You are back in the Setup.