Fade Command - MA lighting dot2 User Manual

Example 3
Let´s assume, you will delete cue 1 from a executor button 1.
There are three different ways to do this.
a) Press Delete 1 (= Cue 1)
b) Press Delete 1 (= Cue 1) and tap on the executor 1 in the
c) Press Delete 1 (= Cue 1) and press the respective executor button
If a cue list is stored on executor 1, the console ask to
Example 4
Let´s assume, you will set intensity of executor 1 at 50 %.
The physical fader doesn´t move.
To grab the fader again, you have to move the fader once to the actual value.
The fader is working.
To apply the value to the main executor, do not type in an executor number, just
Press Exec 1 At 50 Please
The executor has now 50 %. This is the same as you would move the fader up to 50 %.
Example 5
Let´s assume, you will trigger executor 1 by a
Press the small Go + (=Go )
Executor 1 is triggered by a Go command. This is the same as your executor button is assigned with a Go command.
Related Links
Exec Key
Page Pool View
Fixtures View
Go Command
8.22.

Fade Command

This page describes the syntax and how to use the fade command.
To go to the fade command it is necessary to press another function key before, e.g.
Description
© 2 0 1 5 MA L i g h t i n g T e c h n o l o g y G mb H - D a c h d e c k e r s t r . 1 6 - D - 9 7 2 9 7 Wa l d b ü t t e l b r u n n - G e r ma n y - w w w . ma l i g h t i n g . c o m
d o t 2 U s e r Ma n u a l
Exec 1 Please .
choose the delete
.
Go command.
Exec 1 Please .
386
executor bar view.
on the console.
method.
Store Time
Exec .
(=Fade).