Midinote Command - MA lighting dot2 User Manual

Macro Command
8.38.
This page describes the syntax and how to use the marco command.
To go to the macro command, press
Description
With the macro command, you start a macro from the
Syntax
Start a macro.
Macro 1
Example
Let´s assume, you will start macro 1 (e.g. +5 %) to the selected fixtures.
Press Macro 1 Please
Macro 1 is started.
Related Links
Macro Key
Macro Pool
8.39.

MidiNote Command

This page describes the syntax and how to use the
To use the MidiNote command, type
Description
With the MidiNote command, you send MIDI Note messages via the Midi Out port at the back of the console.
If a MIDI channel is entered in the command, the entered MIDI channel will be used.
If no MIDI channel is entered, the MIDI out channel in the
If a velocity is entered in the command, the entered velocity will be used.
If no velocity is entered, velocity 127 (full) will be used.
If the Off command is used, a MidiNote Off is sent.
Hint:
To double-check the sent MIDI Notes, press
For more information, see
Syntax
© 2 0 1 5 MA L i g h t i n g T e c h n o l o g y G mb H - D a c h d e c k e r s t r . 1 6 - D - 9 7 2 9 7 Wa l d b ü t t e l b r u n n - G e r ma n y - w w w . ma l i g h t i n g . c o m
d o t 2 U s e r Ma n u a l
Macro on the console.
.
MidiNote
MidiNote
or the short cut
MIDI Monitor.
macro pool.
command.
Mn
in the command
MIDI Show Control window
Tools and tap under column MIDI at in the MIDI Monitor .
406
line.
is used.