MA lighting dot2 User Manual page 189

d o t 2 U s e r Ma n u a l
Figure 3: Select DMX universe and address
To get an overview about assigned and available DMX addresses, tap Select... on the right. The Select DMX
Address... Window opens.
Offset
The offset displays the selected patch offset.
The offset is the free DMX address space between one fixture and another fixture. A patch offset gives you a better
overview about the fixtures and their patch address.
To patch a few fixtures and with a start address of x.xx1, select a patch offset of 10.
To select the quantity, tap the plus or minus. By default the offset is 1.
Figure 4: Patch and Fixture Schedule with Offset of 10
Encoder Bar Functions
Figure 5: Encoder Bar Add New Fixtures Window
Type:
To scroll in the drop-down list from the edit line Type, turn the encoder left or right.
189
© 2 0 1 5 MA L i g h t i n g T e c h n o l o g y G mb H - D a c h d e c k e r s t r . 1 6 - D - 9 7 2 9 7 Wa l d b ü t t e l b r u n n - G e r ma n y - w w w . ma l i g h t i n g . c o m