MA lighting dot2 User Manual page 315

Flash
(only for executors with faders): Sets the group master to 100 %, as long as you press and hold the executor
button.
Black:
Sets the group master to 0 %, as long as you press and hold the executor button.
Main Fader Executor
If the selected executor is a main fader executor, there are five different functions available.
Figure 6: Select Function of Executor - Main Fader Executor
Master:
Scales the output of dimmer values.
Crossfade:
Crossfade between two cues.
CrossfadeA:
Crossfade downgoing dimmer values.
CrossfadeB:
Crossfade upgoing dimmer values.
TempFader:
Crossfade the cue on when pulled up, and off when pulled down.
Normal Fader Executor
If the selected executor is a normal fader executor, there are three different functions available.
Figure 7: Select Function of Executor - Normal Fader Executor
Master:
Scales the output of dimmer values.
© 2 0 1 5 MA L i g h t i n g T e c h n o l o g y G mb H - D a c h d e c k e r s t r . 1 6 - D - 9 7 2 9 7 Wa l d b ü t t e l b r u n n - G e r ma n y - w w w . ma l i g h t i n g . c o m
d o t 2 U s e r Ma n u a l
315