Description
With the if command you can e.g.
deselect fixtures from the current selection if they are not in a group
limit the
clone command
limit the
delete command
select fixtures only if they are overlapping
Syntax
1. Deselect fixtures from the current selection if not stored in group 1.
If Group 1
2. Limit the clone command.
Clone Fixture 33 If Executor 1
3. Limit the delete command.
Delete Cue 3 If Fixture 1
Example 1
Let´s assume, you will deselect all current selected fixtures if they are not stored in group 1.
Press and hold
+
All fixtures which are not stored in group 1 are deselected.
Example 2
Let´s assume, you will clone the fixture 1 only on executor 2, because you need one more fixtures for the actors light.
Press
+
Copy
(= Clone)
button
Please
.
The console will ask you to
Fixtures 1 is cloned at fixture 33 thru 35, only on executor 1.
Example 3
Let´s assume, you will delete just fixture 1 from cue 2 on the main executor.
Press
Delete 2
(=Cue 2)
Fixture 1 is deleted from Cue 2 on the main executor.
Example 4
© 2 0 1 5 MA L i g h t i n g T e c h n o l o g y G mb H - D a c h d e c k e r s t r . 1 6 - D - 9 7 2 9 7 Wa l d b ü t t e l b r u n n - G e r ma n y - w w w . ma l i g h t i n g . c o m
d o t 2 U s e r Ma n u a l
and clones only if the fixtures is stored on an executor
and deletes only a fixture from a cue
If
(= If)
Group 1 Please
Fixture 1 At 33 Thru 35
choose the clone
method.
+
If
(= If)
Fixture 1 Please
.
+
If
(= If) and the respective executor
.
399