MA lighting dot2 User Manual page 269

7. Align Off:
Turns the align mode off. Refer to,
8. Circular Copy >:
Copies all values of the selected fixtures one step to the right.
This is useful to create a chaser.
9. Circular Copy <:
Copies all values of the selected fixtures one step to the left.
This is useful to create a chaser.
10. Clear Selection:
Clears the selection of fixtures. Refer to,
11. Clear All:
Clears the selection and removes all values from the programmer. Refer to,
12. Even:
Selects every second fixture of the current fixture selection, starting with the second fixture.
Next and Previous Key function changes into a toggle function between even and odd.
Reset the Next and Previous Key back to default by using
13. Even ID:
Selects only fixtures with an even fixture ID of the current fixture selection.
Next and Previous Key selects next and previous even fixture ID.
Reset the Next and Previous Key back to default by using
14. IfActive:
Selects only fixtures in the
15. if output:
Selects only fixtures in the
16. IfProg:
Selects only fixtures in the
17. Invert:
Enters the Invert Command
© 2 0 1 5 MA L i g h t i n g T e c h n o l o g y G mb H - D a c h d e c k e r s t r . 1 6 - D - 9 7 2 9 7 Wa l d b ü t t e l b r u n n - G e r ma n y - w w w . ma l i g h t i n g . c o m
d o t 2 U s e r Ma n u a l
Align Key.
Clear Key.
fixtures view, if they have active programmer values. Refer to,
fixtures view, if they have a dimmer value bigger than 0.
fixtures view, if they have values in the programmer. Refer to,
in the command line.
Clear
Macro 24 Reset Next/Previous
Macro 24 Reset Next/Previous
269
Key.
Key.
Key.
What is a Programmer?
What is a Programmer?