MA lighting dot2 User Manual page 44

d o t 2 U s e r Ma n u a l
Now we are going to add some more fixtures to our patch.
We got four ETC Vivid-R 11 color wash fixtures. Our new plot looks like this:
They are mounted on vertical pipes on each side of the stage.
We need to go back into the setup and add these four fixtures. Press Setup and select
Patch & Fixture Schedule .
On the right side you'll find a button called Add New Fixtures - That sounds like something we need.
Add New Fixtures window
When you press this, you'll get the .
In the type we still have the Dimmer selected. We have all the dimmers we need, so we need to get a new fixture
type. Press the button next to this area where it says Select Other... . If this is the first time this is done, then the
console needs to update the fixture library - That might take a few seconds.
vivid
When it's done (or if you didn't need to wait for it) you can press the green input field and type .
The search will display every possible hit in the fixture library. The easy way to select the right fixture is using the
encoders.
We need the one from ETC called Vivid-R 11. This fixture only have one mode available. Often when this is the case
then the mode is called "00". It's the same for our dimmers - remember they also have a 00 at the end.
Ok, when you've found it and the bottom of your screen looks like this:
44
© 2 0 1 5 MA L i g h t i n g T e c h n o l o g y G mb H - D a c h d e c k e r s t r . 1 6 - D - 9 7 2 9 7 Wa l d b ü t t e l b r u n n - G e r ma n y - w w w . ma l i g h t i n g . c o m