Park Command - MA lighting dot2 User Manual

There are two ways to do this.
a) Press Delete Page 1 Please
b) Press Delete and tap on page 1 in the
All executors stored on page 1 are deleted.
Example 3
Let´s assume, you will create a new page 3.
There are two ways to do this:
a) Press Store Page 3 Please
b) Press Page + until you reach page 3.
Page 3 is created.
Example 4
Let´s assume, you will label page 2 as effects.
There are two ways to do this:
a) Press Label Page 2 Please
b) Press Label and tap on page 2 in the
The Enter Name for Window
Related Links
Page Pool View
Page Key
Page + Key
8.46.

Park Command

This page describes the syntax and how to use the Park command.
To go to the Park command, press and hold
Park is in the command
Description
With the Park command, you can park
the current value of a fixture
a specific value of a fixture
the values of a preset type from a fixture selection
a specific DMX channel
© 2 0 1 5 MA L i g h t i n g T e c h n o l o g y G mb H - D a c h d e c k e r s t r . 1 6 - D - 9 7 2 9 7 Wa l d b ü t t e l b r u n n - G e r ma n y - w w w . ma l i g h t i n g . c o m
d o t 2 U s e r Ma n u a l
.
page pool.
.
.
page pool.
opens.
line.
+ Pause (=Park) on the console.
417