MA lighting dot2 User Manual page 418

Parked DMX channels are displayed with a blue background in the
If you want to unpark DMX channels, open the
Syntax
1. Park the the current values of a fixture.
Park Fixture 1
2. Park all attributes of fixture 1 at 100 %.
Park Fixture 1 At 100
3. Park the values of the dimmer preset type of the current fixture selection.
Park PresetType Dimmer
4. Park a specific DMX channel.
Park DMX 1.1
Example 1
Let´s assume you will park the current values of fixture 1.
There are two ways to do this:
a) Press and hold +
b) Press and hold +
Example 2
Let´s assume you will park all attributes of fixture 1 at 100 %.
Press and hold +
All attributes of fixture 1 are parked at 100 %.
Example 3
Let´s assume you will park all dimmer values of the current fixture selection.
There are two ways to do this:
a) Press and hold +
b) Press and hold +
© 2 0 1 5 MA L i g h t i n g T e c h n o l o g y G mb H - D a c h d e c k e r s t r . 1 6 - D - 9 7 2 9 7 Wa l d b ü t t e l b r u n n - G e r ma n y - w w w . ma l i g h t i n g . c o m
d o t 2 U s e r Ma n u a l
Pause (=Park) and tap at fixture 1 in the
Pause (=Park) Fixture 1 Please
Pause (=Park) Fixture 1 At 1 0 0 Please
Pause (=Park) and tap at Dimmer in the
Pause (=Park) +
tools window.
fixtures view.
.
preset type
Preset (=PresetType) and enter in the command line the word
418
DMX view.
.
bar.