MA lighting dot2 User Manual page 337

Something is not patched:
There are fixtures in the
Patch and Fixture Schedule.
Unassigned Ports:
Fixtures in the Patch and Fixture Schedule
single dot2 core.
Not enough Parameters:
The dot2 onPC is missing a connected device to have DMX output.
A connected dot2 console or a connected Node4 is necessary for the dot2 onPC, to have a DMX output.
More than 1024 DMX channels are patched on a dot2 onPC.
Parked:
DMX channels are parked. Parked channels has a blue background in the
To unpark all DMX channels, open the
Preview:
Preview is on. Refer to, Prvw (Preview) Key
Blind:
Blind is on. Refer to, Blind Key
Global Autofix:
Global autofix is off. To turn global autofix on, refer to
Group/Grand Master:
A group or the grand master is less than 100%. Refer to
Physical Setup and Layout.
Highlight:
The highlight mode is on. Refer to,
© 2 0 1 5 MA L i g h t i n g T e c h n o l o g y G mb H - D a c h d e c k e r s t r . 1 6 - D - 9 7 2 9 7 Wa l d b ü t t e l b r u n n - G e r ma n y - w w w . ma l i g h t i n g . c o m
d o t 2 U s e r Ma n u a l
Patch and Fixture Schedule
are assigned to an universe what is not available, e.g. universe 5 on a
tools window.
and Preview
and Blind Command.
Highlt (Highlight)
without a patch address. Double-check the fixtures in the
DMX
Command.
Global Settings.
Empty Executor window
Key.
337
view.
and Getting Started Guide - 2