On Command - MA lighting dot2 User Manual

Example 4
Let´s assume, you have selected the fixtures 1 thru 10 and you will remove fixture 5 along with their values from the
programmer in the fixtures view.
There are two ways to do this:
a) Press Off and then tap on fixture 5 in the
b) Press Off Fixture 5 Please
Fixture 5 and their values are removed from the selection.
Related Links
Off Key
Executor Bar View
Fixtures View
8.42.

On Command

This page describes the syntax and how to use the on command.
To go to the on command, press
Description
With the on command you can
turn on an executor
turn on an executor with fade time
turn on all normal executors assigned with a cue list
activate all values of a fixture in the programmer
activate all values from a preset type for the selected fixtures in the programmer
Syntax
1. Turn on an executor.
On
2. Turn on an executor with fade time.
On Executor 1 Fade 2
3. Turn on all normal executors with a cue list.
On Thru
4. Activate all values of a fixture in the programmer.
© 2 0 1 5 MA L i g h t i n g T e c h n o l o g y G mb H - D a c h d e c k e r s t r . 1 6 - D - 9 7 2 9 7 Wa l d b ü t t e l b r u n n - G e r ma n y - w w w . ma l i g h t i n g . c o m
d o t 2 U s e r Ma n u a l
fixtures view.
.
On on the console.
411