MA lighting dot2 User Manual page 415

8.44. OutFade Command
This page describes the syntax and how to use the OutFade command.
To go to the OutFade command it is necessary to press another function key before, e.g.
twice (= OutFade).
Description
With the OutFade command, you can indicate out fade times
for a new cue with out fade time
in a existing cue
Indicate out fade times for getting smaller dimmer values.
Syntax
1. Store a new cue 1 with an out fade time of 4 seconds.
Store Cue 1 OutFade 4
2. Assign a out fade time of 5 seconds to the existing cue 3 on executor 1.
Assign OutFade 5 Cue 3 Executor 1
Example 1
Let´s assume, you will store a new cue on the main executor with an out fade time of 4 seconds.
Press Store 1 (= Cue 1) two times
Cue 1 is stored with an out fade time of 4 seconds.
Double check the cue timing in the
Example 2
Let´s assume, you will assign an out fade time of 5 seconds to the existing cue 3 stored on executor 1.
Press + Label (=Assign) two times
Cue 3 on executor 1 has now an out fade time of 5 seconds.
Related Links
Time Key
Cues View
Store Command
© 2 0 1 5 MA L i g h t i n g T e c h n o l o g y G mb H - D a c h d e c k e r s t r . 1 6 - D - 9 7 2 9 7 Wa l d b ü t t e l b r u n n - G e r ma n y - w w w . ma l i g h t i n g . c o m
d o t 2 U s e r Ma n u a l
Time (= OutFade) 4 Please
Cues View.
Time (= OutFade) 5 Cue 3 Exec 1 Please
415
Store
.
.
and press Time