Invert Command - MA lighting dot2 User Manual

Example 2
Let´s assume, you will select all fixtures with a current dimmer output between 50 and 75.
Press If (= IfOutput) At 50 Thru 75 Please
All fixtures with a current dimmer output between 50 and 75 are selected.
Example 3
Let´s assume, you will select all fixtures using currently the color preset "cyan" (4.2) to give them a new color preset
"orange".
There are two ways to do this:
a) Press If (= IfOutput) and tap at preset "Cyan" in the color presets pool.
b) Press If (= IfOutput)
All fixtures using currently color preset "Cyan" (4.2) are selected and it is easy to give them another color preset.
Related Links
If Key
Fixtures View
8.35.

Invert Command

This page describes the syntax and how to use the
To go to the Invert command, press
Invert is in the command
Description
With the invert command you can
select fixtures which are currently not selected in the
deselect fixtures which are currently selected in the
Syntax
1. Invert all fixtures in group 1.
Invert Group 1
2. Invert fixture selection.
Invert Fixture 1 Thru 3
Example 1
© 2 0 1 5 MA L i g h t i n g T e c h n o l o g y G mb H - D a c h d e c k e r s t r . 1 6 - D - 9 7 2 9 7 Wa l d b ü t t e l b r u n n - G e r ma n y - w w w . ma l i g h t i n g . c o m
d o t 2 U s e r Ma n u a l
Preset 4 (= preset pool color)
Macro on the console and tap at Macro 22 "Invert".
line.
.
. 2 (= second preset in the color preset pool)
Invert
command.
fixtures view
fixtures view
401
Please .