Ifoutput Command - MA lighting dot2 User Manual

Example 4
Let´s assume, you will only select the fixtures if they are in the group 1 (front truss) and group 2 (wash lights).
Press Group 1
All fixtures which are overlapping in group 1 and 2 are selected in the fixtures view.
Related Links
If Key
Clone Command
Delete Command
8.34.

IfOutput Command

This page describes the syntax and how to use the IfOutput command.
To go to the IfOutput command, press
Description
With the IfOutput command you can select all fixtures in the
dimmer output above zero
dimmer output in a range
preset output
Syntax
1. Select all fixtures with a current dimmer output above zero.
IfOutput
2. Select all fixtures with the current dimmer output between 50 and 75.
IfOutput At 50 Thru 75
3. Select all fixtures with the current output of color preset cyan.
IfOutput Preset 4.2
Example 1
Let´s assume, you will select all fixtures with a current dimmer output above zero.
Press If (= IfOutput) Please
All fixtures with a current dimmer output are selected in the fixtures view.
Example 2
© 2 0 1 5 MA L i g h t i n g T e c h n o l o g y G mb H - D a c h d e c k e r s t r . 1 6 - D - 9 7 2 9 7 Wa l d b ü t t e l b r u n n - G e r ma n y - w w w . ma l i g h t i n g . c o m
d o t 2 U s e r Ma n u a l
+ If (= If) Group 2 Please
If (= IfOutput) on the console.
.
.
fixtures view with a current
400