MA lighting dot2 User Manual page 170

Pressing the Time key opens the
Using this window you can set the different times used when storing new cues.
If you are storing a cue and you have pressed the
different default timing than the factory defaults.
Also when you are storing cues, you can temporary store a different time than your defaults using the
When using Time with Store you get the
Example
You want to store cue 2 with a fade time of 3 seconds. You press:
Store Cue 2 Time 3 Please
Notice that the command line is actually changing the time command into fade:
Store Cue 2 Fade 3
If you continue to press the Time key during the store operation, you can get to all the different possible timings in a
cue (except the preset type timings).
Store Cue 1 Time 2 Time 3 Time 4 Time 5 Time 6 Time 7
Gives you this in the command line:
Store Cue 1 Fade 2 OutFade 3 Delay 4 OutDelay 5 SnapPercent 6 CmdDelay 7
Special Masters
You can use the Time
© 2 0 1 5 MA L i g h t i n g T e c h n o l o g y G mb H - D a c h d e c k e r s t r . 1 6 - D - 9 7 2 9 7 Wa l d b ü t t e l b r u n n - G e r ma n y - w w w . ma l i g h t i n g . c o m
d o t 2 U s e r Ma n u a l
Time defaults window.
Fade Command.
key to create two different special masters.
Store key, then the Time
170
key will flash when you have set a
Time key.