Using The Revert Command; Other Editing Commands - Alcatel-Lucent 7750 SR OS Basic System Configuration Manual

Using the Revert Command

The
revert
reference goes offline or becomes unstable. When the failed reference becomes operational, it is
eligible for selection.
When mode is non-revertive, a failed clock source is not selected again.
CLI Syntax: config>system>sync-if-timing

Other Editing Commands

Other editing commands include:
•
•
CLI Syntax: config>system>sync-if-timing
7750 SR OS Basic System Configuration Guide
command allows the clock to revert to a higher priority reference if the current
revert
— This command saves changes made to the timing references during a session.
commit
Modifications are not persistent across system boots unless this command is entered.
— This command discards changes that have been made to the timing references
abort
during a session.
abort
commit
System Management
Page 295