f. Hand-tighten the cathode nut (E). Make sure the smooth portion of the nut is against the
cathode clamp.
g. Tighten the cathode screw (D) with a hex key.
h. Align the ring terminal on the anode wire (B) with the mounting position, ensuring the
crimped side of the wire is facing out.
i. Tighten the anode screw.
j. Route the anode lead away from nearby metal surfaces.
9. Close the lamp access door and tighten the 2 thumbscrews.
10. Close and lock the rear access door.
Make sure the hex key is placed back into its holder before closing the rear access door.
Connect Devices to the Projector
To display content, you must connect a device that is capable of storing or playing content to the
projector.
Projector Connections and Status LEDs
Item
A
Indicates the status of the regulator. A solid blue LED indicates the regulator is enabled. If the
LED is not illuminated, the regulator is not enabled.
CP2215 User Manual
020-101225-01 Rev. 1 (01-2014)
Downloaded from ProjectorsManual.com Manuals
Description
Installation and Setup
10