B External Connections - Waters Xevo G2 QTof Operator's, Overview And Maintenance Manual

B
External Connections
This appendix describes the mass spectrometer's external connections.
Contents:
Topic
Mass spectrometer external wiring and vacuum connections
Connecting the Varian oil-filled roughing pump
Connecting the Edwards oil-free roughing pump
Connecting to the nitrogen gas supply
Connecting to the collision cell gas supply
Connecting the nitrogen exhaust line
Connecting the liquid waste line
Connecting the EPC
Connecting the workstation (systems with no ACQUITY LC)
Connecting Ethernet cables (systems with ACQUITY LC)
Input/output signal connectors
Connecting to the electricity source
Connecting the NanoLockSpray source camera
The mass spectrometer is heavy. To avoid injury, use
Warning:
suitable machinery and the supplied harness to lift it.
Caution:
• Contact Waters Technical Service before moving the
instrument.
• If you must transport the mass spectrometer, or remove it from
service, contact Waters Technical Service for recommended
cleaning, flushing, and packaging procedures.
Page
B-2
B-3
B-7
B-10
B-12
B-12
B-15
B-18
B-19
B-20
B-20
B-26
B-26
B-1