Table of Contents
Advertisement
To open the source isolation valve after completing a maintenance
procedure:
Warning:
the source enclosure open if one or both of these conditions apply:
• An ESI probe is fitted (the probe tip is sharp).
• A corona pin is fitted (the pin tip is sharp).
1.
Open the source isolation valve by moving its handle clockwise to the
horizontal position.
2.
Close the source enclosure.
5-16
Maintenance Procedures
The source components can be contaminated with
Warning:
biohazardous and/or toxic materials. Always wear
chemical-resistant, powder-free gloves while performing this
procedure.
To avoid puncture wounds, take great care while working with
Isolation valve
handle in open
position
TP03130
Hide quick links:
Advertisement
Table of Contents
