Fitting The Esi Probe Tip And Gasket - Waters Xevo G2 QTof Operator's, Overview And Maintenance Manual

3. Remove the metal gasket from the probe tip.
Metal gasket
4. Dispose of the metal gasket in accordance with local environmental
regulations.
5. If the probe tip is damaged, dispose of it in accordance with local
environmental regulations.

Fitting the ESI probe tip and gasket

Required materials
• Chemical-resistant, powder-free gloves
• 10-mm wrench
• New metal gasket
The probe tip and metal gasket can be
Warning:
contaminated with biohazardous and/or toxic materials.
Dispose of them according to local environmental
regulations.
Replacing the ESI probe tip and gasket 5-65