Safety And Handling - Waters Xevo G2 QTof Operator's, Overview And Maintenance Manual

Safety and handling

Bear in mind the following safety considerations when performing
maintenance procedures:
Warning:
when handling solvents, changing tubing, or operating the instrument.
Know the physical and chemical properties of the solvents used (see the
Material Safety Data Sheets for the solvents in use).
Warning:
• do not remove the instrument's panels. There are no user-serviceable
items inside the instrument.
• ensure that the instrument is in Standby mode before commencing
any maintenance.
Warning:
great care while working with these components.
Warning:
the source enclosure open if one or both of these conditions apply:
• An ESI probe is fitted (the probe tip is sharp).
• A corona pin is fitted (the pin tip is sharp).
See Appendix A
5-6 Maintenance Procedures
The instrument components can be contaminated with
Warning:
biohazardous and/or toxic materials. Always wear
chemical-resistant, powder-free gloves while handling the
components.
To prevent injury, always observe Good Laboratory Practice
To avoid electric shock,
The probe and source can be hot. To avoid burn injuries, take
To avoid puncture wounds, take great care while working with
for safety advisory information.