Ruckus Wireless SmartCell Gateway 200 Getting Started Manual page 78

Smartzone 3.5.1
Hide thumbs Also See for SmartCell Gateway 200:
Table of Contents

Advertisement

Method
The steps for configuring the encryption method that you want to use depends on
the method you select.
WPA2
Enhanced WPA encryption using AES encryption algorithm.
NOTE:
Enabling WPA2 enables Dynamic PSK under Options.
1 Choose Algorithm:
• AES
-
Enter the Passphrase.
-
Select or clear Show.
-
Choose the required 802.11w MFP option.
• AUTO
-
Enter the Passphrase.
-
Select or clear Show
WPA-Mixed
Allows mixed networks of WPA and WPA2 compliant devices. Use this setting if
your network has a mixture of older clients that only support WPA and TKIP, and
newer client devices that support WPA2 and AES.
1 Choose Algorithm: AES or AUTO.
2 Enter PassPhrase.
3 Select or clear Show.
4 Select Enable 802.11 Fast BSS Transition.
5 Enter the Mobility Domain ID.
WEP-64 (40 bits)
Provides a lower level of encryption, and is less secure, using 40-bit WEP encryption.
1 Choose the WEP Key.
2 Enter HEX value.
SmartCell Gateway 200 Getting Started Guide for SmartZone 3.5.1, 800-71517-001 Rev A
Configuring the SCG for the First Time
Defining the WLAN Settings of a Zone
78

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SmartCell Gateway 200 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Scg200

Table of Contents