Radius Options - Ruckus Wireless SmartCell Gateway 200 Getting Started Manual

• Priority: Set the priority of this WLAN to Low if you would prefer that other WLAN
traffic takes priority. For example, if you want to prioritize internal traffic over guest
WLAN traffic, you can set the priority in the guest WLAN configuration settings
to "Low." By default, all WLANs are set to high priority.

RADIUS Options

NOTE: The RADIUS Options section only appears when Authentication Type (under
WLAN Usage) is set to Standard usage (For most regular wireless networks).
• NAS ID: Select how the RADIUS server will identify the AP:
• WLAN BSSID
• AP MAC
• User-defined
• NAS Request Timeout: Type the timeout period (in seconds) after, which an
expected RADIUS response message is considered to have failed.
• NAS Max Number of Retries: Type the number of failed connection attempts
after which the SCG will fail over to the backup RADIUS server.
• NAS Reconnect Primary: If the controller fails over to the backup RADIUS server,
this is the interval (in minutes) at which the controller will recheck the primary
RADIUS server if it is available. The default interval is 5 minutes.
• Call STA ID: Use either WLAN BSSID or AP MAC as the station calling ID. Select
one.
SmartCell Gateway 200 Getting Started Guide for SmartZone 3.5.1, 800-71517-001 Rev A
Configuring the SCG for the First Time
Defining the WLAN Settings of a Zone
82