Ruckus Wireless SmartCell Gateway 200 Getting Started Manual page 62

Table 12. New zone settings
Field
Radio Options a/n/ac
(5 GHz)
Configuration > AP GRE Tunnel Options (Zone)
SmartCell Gateway 200 Getting Started Guide for SmartZone 3.5.1, 800-71517-001 Rev A
Description
Indicates the radio option 5 GHz
configurations.
Configuring the SCG for the First Time
Your Action
Select the following options:
• Channelization—Set the channel
width used during transmission to
either 20, 40, 80, 80+80, 160
(MHz), or select Auto to set it
automatically.
• Channel—For Indoor and
Outdoor, select the channel to use
for the a/n/c (5GHz) radio, or
select Auto to set it automatically.
• Secondary Channel (80+80)—For
Indoor and Outdoor, the default
secondary channel to use for the
a/n/c (5GHz) radio, is set as Auto.
• TX Power—Select the preferred
TX power, if you want to manually
configure the transmit power on
the 5GHz radio. By default, TX
power is set to Full on the 5GHz
radio.
• WLAN Group (AP Groups)—
Specify to which WLAN group this
AP group belongs.
Creating an AP Zone
62