Ruckus Wireless SmartCell Gateway 200 Getting Started Manual page 36

Smartzone 3.5.1
Hide thumbs Also See for SmartCell Gateway 200:
Table of Contents

Advertisement

Figure 17. The Internet Protocol Version 4 (TCP/IP) properties dialog box
4 Select Use the following IP address (if it is not already active) and make the
following entries:
• IP address: 192.168.2.13 (or any address on the 192.168.2.x network other
than 192.168.2.2, which is in use by the SCG)
• Subnet mask: 255.255.255.0
• Default gateway: 192.168.2.2
• Preferred DNS server: 192.168.2.2
5 Leave the Alternate DNS Server field empty.
6 Click OK to save your changes and exit first the TCP/IP Properties dialog box,
then the Local Area Connection Properties dialog box. Your changes are put into
effect immediately.
You have completed preparing the administrative computer.
SmartCell Gateway 200 Getting Started Guide for SmartZone 3.5.1, 800-71517-001 Rev A
Preparing the Interface Settings and Administrative Computer
Preparing the Administrative Computer
36

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SmartCell Gateway 200 and is the answer not in the manual?

This manual is also suitable for:

Scg200

Table of Contents