Ruckus Wireless SmartCell Gateway 200 Getting Started Manual page 60

Table 12. New zone settings
Field
Configuration > Group Members (AP Groups)
Members
Access Points
Configuration > Radio Options
Channel Range
(2.4G)
DFS Channels
Channel Range (5G)
Indoor
Channel Range (5G)
Outdoor
SmartCell Gateway 200 Getting Started Guide for SmartZone 3.5.1, 800-71517-001 Rev A
Description
Displays the list of APs that belong to
the group.
Displays the list of APs that belong to
the zone.
Indicates that you want to override the
2.4GHz channel range that has been
configured for the zone to which this
AP group belong.
Allows ZoneFlex APs to use DFS
channels.
Indicates for what channels want the
5GHz radios of managed indoor APs
to operate.
Indicates for what channels want the
5GHz radios of managed outdoor
APs to operate.
Configuring the SCG for the First Time
Your Action
Select the members from the list and
click Move to to assign them to the
required group.
Select the access points from the list,
and the click Add to Group.
Select Select Channel Range (2.4G)
check boxes for the channels on
which you want the 2.4GHz radios of
managed APs to operate. Channel
options include channels 1 to 11. By
default, all channels are selected.
Select the check box.
Select the check boxes.
Select the check boxes.
Creating an AP Zone
60