Defining The Wlan Settings Of A Zone - Ruckus Wireless SmartCell Gateway 200 Getting Started Manual

Defining the WLAN Settings of a Zone

Follow these steps to configure the WLAN settings of a zone.
1 On the menu, click Wireless WLANs.
2 From the zone and AP group tree, select the zone for which you want to define
the WLAN settings.
3 Click
4 Configure the WLAN settings listed in
description of each setting in the succeeding sections.
Table 14. Overview of WLAN settings
WLAN Setting
General Options
WLAN Usage
Authentication Options
Encryption Options
Authentication & Accounting
Service
Options
Advanced Options
5 Click OK to finish creating the WLAN service.
SmartCell Gateway 200 Getting Started Guide for SmartZone 3.5.1, 800-71517-001 Rev A
. The Create WLAN Configuration form appears.
Description
Enter the WLAN name and description. See
Options.
Select the usage type (standard WLAN or hotspot). See
WLAN Usage.
Select an authentication method for this WLAN (open or
802.1X EAP). See
Select an encryption method (WPA, WPA2, WPA Mixed),
encryption algorithm (AES or TKIP) and enter a WPA
passphrase. See
This section only appears when certain authentication
options are selected. See
Usage).
Select whether web-based authentication (captive
portal) will be used, and which type of authentication
server will be used to host credentials (local database,
Active Directory, RADIUS, LDAP). Also, enable or
disable Wireless Client Isolation, Zero-IT Activation,
Dynamic PSK and Priority for this WLAN.
See Options.
Select an accounting server and configure ACLs, rate
limiting, VLAN/dynamic VLAN settings, tunneling,
background scanning, maximum client threshold, and
service schedule. See
Configuring the SCG for the First Time
Defining the WLAN Settings of a Zone
Table 14. You can find a detailed
Authentication Options.
Encryption Options.
Accounting Server (Standard
Advanced Options.
General
75