Ruckus Wireless SmartCell Gateway 200 Getting Started Manual page 63

Table 12. New zone settings
Field
Tunnel Type
GRE Tunnel Profile
Configuration > Syslog Options (Zone)
Enable external
syslog server for APs
Configuration > AP SNMP Options
Override zone
configuration (AP
Groups)
Enable AP SNMP
SmartCell Gateway 200 Getting Started Guide for SmartZone 3.5.1, 800-71517-001 Rev A
Description
Indicates if support for APs behind
NAT is enabled.
Note: AP zones configured with IPv6
network address configuration only
support RuckusGRE tunnel type.
Indicates the tunnel profile.
Indicates if an external syslog server
is enabled.
Indicates if the AP group configuration
overrides the zone configuration.
Indicates if the AP SNMP option is
enabled.
Configuring the SCG for the First Time
Your Action
Select the required option. If you
want to use Ruckus GRE tunneling
for this zone, you can use the default
tunnel profile or you can select a
profile that you created. If you want
to use SoftGRE tunneling, you must
first create a SoftGRE tunnel profile.
SoftGRE tunnel types support IPv4
SoftGRE and IPv6 SoftGRE tunnel
profiles, and SoftGRE+IPSec tunnel
types support IPv4 SoftGRE and
IPv6 IPSec tunnel profiles.
Select the required option or click
Create and enter the following
details:
• Name
• Description
• Tunnel Encryption
• WLAN Interface MTU
Select the check box and enter the
following details:
• Server Address
• Port
• Facility for Event
• Priority
Select the check box and choose the
options.
Select the check box.
Creating an AP Zone
63