Ruckus Wireless SmartCell Gateway 200 Getting Started Manual page 21

Mounting and Powering the SCG
In this chapter:
• Mounting the SCG onto a Server Rack
• What You Will Need
• Step 1: Unpack the Rack Mount Kit
• Step 2: Separate the Slide Rails into the Inner and Outer Parts
• Step 3: Install the Outer Rail Slides to the Rack Posts
• Step 4: Fasten the Shoulder Screws to the Server
• Step 5: Install the Inner Rails on the Server
• Step 6: Fasten the Inner Rails to the Server
• Step 7: Attach the Mounting Ears to the Rail Assembly
• Step 8: Slide the Rail Assembly into the Outer Rails and Secure to the Rack
• Powering On the SCG
SmartCell Gateway 200 Getting Started Guide for SmartZone 3.5.1, 800-71517-001 Rev A
2
21