Ruckus Wireless SmartCell Gateway 200 Getting Started Manual page 88

Ensuring That APs Can Discover the
Controller on the Network
Before the controller can start managing an AP, the AP must first be able to discover
the controller on the network when it boots up. This chapter describes procedures
that you can perform to ensure that APs can discover and register with the controller
on the network.
In this chapter:
• Is LWAPP2SCG Enabled on the Controller?
• Method 1: Perform Auto Discovery of the Controller Using the AP Registrar
• Method 2: Perform Auto Discovery on Same Subnet, then Transfer the AP to
Intended Subnet
• Method 3: Register the Controller with the DNS Server
• Method 4: Configure DHCP Option 43 on the DHCP Server
• Method 5: Manually Configure the Controller Address on the AP's Web Interface
SmartCell Gateway 200 Getting Started Guide for SmartZone 3.5.1, 800-71517-001 Rev A
6
88