Show Controllers Plim Asic Spa Bay - Cisco XR 12000 Command Reference Manual

show controllers plim asic spa bay

show controllers plim asic spa bay
To display statistical information for the SPA ASIC, use the show controllers plim asic spa command in
EXEC mode.
show controllers plim asic spa bay bay-number [location node-id]
Syntax Description
bay-number
location node-id
Command Default
No default behavior or values
Command Modes
EXEC
Command History
Release
Release 3.2
Release 3.5.0
Usage Guidelines
Task ID
Task ID
interface
root-system
Examples
The following sample output is from the show controllers plim asic spa bay command:
RP/0/0/CPU0:router# show controllers plim asic spa bay 0 location 0/4/CPU0
=======================================
SPA OIR state
SPA state
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
8
Displays information about the SPA in the specified bay. Range is from 1 through
3.
Identifies the location of the SPA whose ASIC information you want to display.
The node-id argument is expressed in the rack/slot/module notation.
Use the show platform command to see the location of all nodes installed
Note
in the router.
Modification
This command was introduced.
The {0| 1 } keywords were replaced with the bay-number argument.
SPA 0 table:
: present
: enabled
ASIC Driver Commands
Operations
read
read
OL-28456-02