Cisco XR 12000 Command Reference Manual page 169

Tech-Support Commands
sent-to
background
compressed
uncompressed
Command Default
The command output is not compressed.
Command Modes
Administration EXEC
Command History
Release
Release 3.2
Usage Guidelines
This command can generate a very large amount of output. You may want to redirect the output to a file
Tip
using the file send-to keyword and argument. Redirecting the output to a file also makes sending the
output to your Cisco Technical Support representative easier.
OL-28456-02
Name of the file. The following valid options are listed:
• filename
• bootflash: filename
• compactflash: filename
• disk0: filename
• disk1: filename
• flash: filename
• ftp: filename
• harddisk: filename
• harddiska: filename
• nvram: filename
• rcp: filename
• slot0: filename
• slot1: filename
• tftp: filename
(Optional) Specifies that the command runs in the background.
(Optional) Displays compressed command output.
(Optional) Displays the command output with no compression.
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
show tech-support control-ethernet
Modification
This command was introduced.
161