Cisco XR 12000 Command Reference Manual page 190

show tech-support igmp snooping
Command Default
Output is logged to the terminal screen.
Command Modes
EXEC
Command History
Release
Release 3.9.0
Usage Guidelines
This command can generate a very large amount of output. You may want to redirect the output to a file
Tip
using the file send-to keyword and argument. Redirecting the output to a file also makes sending the
output to your Cisco Technical Support representative easier.
This command generates igmp snooping debug information that can be useful for Cisco Technical Support
representatives when troubleshooting a router. See 'Obtaining Documentation and Submitting a Service
Request' section on page iii in the Preface for Cisco Technical Support contact information.
This command is not required during normal use of the router.
Note
The following show commands run automatically when you run the show tech-support igmp snooping
command:
• show version
• show running-config sanitize
• show redundancy
• show logging
• show platform
• show install active detail
• show install committed detail
• show install inactive detail
• show pkgfs trace location all
• show install trace loadpath location node-id
• show install trace io location node-id
• show install trace instdir-lr location node-id
• show install trace insthelper location node-id
• show install trace notify location node-id
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
182
Modification
This command was introduced.
Tech-Support Commands
OL-28456-02