Show Tech-Support Ethernet - Cisco XR 12000 Command Reference Manual

show tech-support ethernet

show tech-support ethernet
To automatically run show commands that display information specific to ethernet debugging, use the show
tech-support ethernet command in EXEC mode.
show tech-support [file send-to [background] [compressed| uncompressed]] [interface interface-type
interface-instance] [location node-id] [rack]
Syntax Description
file
sent-to
interface
interface-type
interface-instance
locationnode-id
rack
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
170
(Optional) Specifies that the command output is saved to a specified file.
(Optional) Name of the file. The following valid options are listed:
• filename
• bootflash: filename
• compactflash: filename
• disk0: filename
• disk1: filename
• flash: filename
• ftp: filename
• harddisk: filename
• harddiska: filename
• nvram: filename
• rcp: filename
• slot0: filename
• slot1: filename
• tftp: filename
(Optional) Collects the status and configuration information about a specific
interface.
Identifies a physical interface or a virtual interface.
Note Use the show interfaces command to see a list of all possible interfaces
currently configured on the router.
Specifies the interface instance. The argument interface-instance is expressed
in the rack/slot/module notation.
(Optional) Specifies a node. The node-id argument is entered in the
rack/slot/module notation.
(Optional) Specifies a list of racks.
Tech-Support Commands
OL-28456-02