Cisco XR 12000 Command Reference Manual page 269

Tech-Support Commands
rack
Command Default
The command output is not compressed.
Command Modes
EXEC
Command History
Release
Release 3.2
Usage Guidelines
This command generates tech-support information that is useful for Cisco Technical Support representatives
when troubleshooting a router. By default, the output of this command is saved on the router's hard disk in a
file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command
to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/name.tgz
tftp://server_path.
For Cisco Technical Support contact information, see the 'Obtaining Documentation and Submitting a Service
Request' section in the Preface.
Tip This command can generate a very large amount of output. You may want to redirect the output to a file
using the file send-to keyword and argument. Redirecting the output to a file also makes sending the
output to your Cisco Technical Support representative easier.
Use the show tech-support routing bfd command to run show commands that display information specific
to BFD debugging. This command generates BFD debugging information that can be useful for Cisco Technical
Support representatives when troubleshooting a router.
This command is not required during normal use of the router.
Note
The following show commands run automatically when you run the show tech-support routing bfd
command:
• show bfd session
• show bfd
• show memory heap fail all
• show memory summary location all
• show process blocked location all
• show adjacency
• show bfd location
OL-28456-02
(Optional) Displays the list of racks.
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
Modification
This command was introduced.
show tech-support routing bfd
261