Show Netio Clients - Cisco XR 12000 Command Reference Manual

show netio clients

show netio clients
To display Network Input and Output (Netio) clients information, use the show netio clients command in
EXEC mode.
show netio clients [location node-id]
Syntax Description
location node-id
Command Default
No default behavior or values.
Command Modes
EXEC
Command History
Release
Release 3.8.0
Release 3.9.0
Release 4.0.0
Usage Guidelines
Task ID
Task ID
cisco-support
Examples
The following example shows the output of the show netio clients command:
RP/0/0/CPU0:router# show netio clients location 0/3/2
XIPC: OutputQ [0:0]/[6000] HighOutputQ [0:18]/[2000] PuntbackQ [0:0]/[6000]
XIPC drops/total: OutputQ: 0/0 HighOutputQ: 0/15682677 PuntbackQ: 0/0
Counters (error/total): Output (0/15682677) Puntback (0/0) Jump (0/0)
ClientID
--------------------------------------------------------------------------------
ipv6_icmp
icmp
clns
chdlc_socket
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
52
(Optional) Displays Netio clients information for a specified node. The node-id
argument is entered in the rack/slot/module notation.
Input Punt
Drop/Total Drop/Total
0/0 0/0
0/0 0/0
0/0 0/0
0/802651 0/0
Modification
This command was introduced.
No modifications.
No modifications.
Operation
read
XIPC InputQ
Cur/High/Max
0/0/1000
0/0/1000
L 0/0/1000
H 0/0/1000
0/2/1000
Troubleshooting Commands
XIPC PuntQ
Cur/High/Max
0/0/1000
0/0/1000
0/0/0
0/0/0
OL-28456-02