Cisco XR 12000 Command Reference Manual page 75

Troubleshooting Commands
verbose
wrapping
Command Default
No default behavior or values.
Command Modes
EXEC
Command History
Release
Release 3.8.0
Release 3.9.0
Release 4.0.0
Usage Guidelines
Task ID
Task ID
cisco-support
Examples The following example shows the output of the show netio trace command:
RP/0/0/CPU0:router# show netio trace chains stats location 0/0/CPU0
/net/node0_0_CPU0/dev/shmem/ltrace/netio/chains--- wrapping: inf Mbytes/sec for 1024 entries
361 wrapping entries (1024 possible, 0 filtered, 361 total)
Jan 11 15:04:14.695 netio/chains--- 0/0/CPU0 t1
0x01000100, prot
o 0 (base), caps 91 (fint_base), op ADD, chain BD, data len 0
Jan 11 15:04:15.070 netio/chains--- 0/0/CPU0 t1
0x01000100, prot
o 18 (lpts), caps 81 (lpts), op ADD, chain D, data len 4
Jan 11 15:04:16.265 netio/chains--- 0/0/CPU0 t1
0x01000100, prot
o 18 (lpts), caps 86 (l2_adj_rewrite), op ADD, chain E, data len 0
Jan 11 15:04:16.274 netio/chains--- 0/0/CPU0 t1
0x01000100, prot
o 18 (lpts), caps 60 (txm_nopull), op ADD, chain E, data len 0
Jan 11 15:04:16.542 netio/chains--- 0/0/CPU0 t1
0x01000100, prot
o 18 (lpts), caps 86 (l2_adj_rewrite), op ADD, chain F, data len 0
Jan 11 15:04:16.542 netio/chains--- 0/0/CPU0 t1
0x01000100, prot
o 18 (lpts), caps 60 (txm_nopull), op ADD, chain F, data len 0
Jan 11 15:04:16.542 netio/chains--- 0/0/CPU0 t1
OL-28456-02
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
(Optional) Displays internal
debugging information
(Optional) Displays wrapping
entries
Modification
This command was introduced.
No modifications.
No modifications.
Operation
read
Chains: update IDB chain, ifhandle
Chains: update IDB chain, ifhandle
Chains: update IDB chain, ifhandle
Chains: update IDB chain, ifhandle
Chains: update IDB chain, ifhandle
Chains: update IDB chain, ifhandle
Chains: update IDB chain, ifhandle
show netio trace
67