Cisco XR 12000 Command Reference Manual page 312

show tech-support tty
rack rack-id
Command Default
The command output is not compressed.
Command Modes
EXEC
Command History
Release
Release 4.3.0
Usage Guidelines
Tip This command can generate a very large amount of output. You may want to redirect the output to a file
using the file send-to keyword and argument. Redirecting the output to a file also makes sending the
output to your Cisco Technical Support representative easier.
Use the show tech-support tty command to run show commands that display information specific to tty
debugging. This command generates tty debugging information that can be useful for Cisco Technical Support
representatives when troubleshooting a router. See 'Obtaining Documentation and Submitting a Service
Request' section on page iii in the Preface for Cisco Technical Support contact information.
This command is not required during normal use of the router.
Note
Task ID
Task ID
cisco-support
Examples The following example shows the output of the show tech-support tty command:
RP/0/0/CPU0:router# show tech-support tty
Tue Sep
++ Show tech start time: 2012-Sep-04.094121.UTC ++
Tue Sep 04 09:41:22 UTC 2012 Waiting for gathering to complete
................................
Tue Sep 04 09:44:31 UTC 2012 Compressing show tech output
Show tech output available at 0/RP0/CPU0 :
harddisk:/showtech/showtech-tty-2012-Sep-04.094121.UTC.tgz
++ Show tech end time: 2012-Sep-04.094432.UTC ++
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
304
(Optional) Specifies a list of racks.
The rack-id denotes a rack number.
4 09:41:21.414 UTC
Modification
This command was introduced.
Operation
read
Tech-Support Commands
OL-28456-02