Tech-Support Commands
show tech-support install
To automatically run show commands that display information specific to installation information, use the
show tech-support install command in the EXEC and administration EXEC modes .
show tech-support install [page | file send-to[background] [compressed| uncompressed]] [location
node-id] [rack]
Syntax Description
page
file
send-to
background
OL-28456-02
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
show tech-support install
(Optional) Displays the command output
on a single page at a time. Use the
Return key to display the next line of
output or use the space bar to display the
next page of information. If not used, the
output scrolls (that is, it does not stop
for page breaks).
(Optional) Specifies that the command
output is saved to a specified file.
(Optional) Name of the file. The
following valid options are listed:
• filename
• bootflash: filename
• compactflash: filename
• disk0: filename
• disk1: filename
• flash: filename
• ftp: filename
• harddisk: filename
• harddiska: filename
• nvram: filename
• rcp: filename
• slot0: filename
• slot1: filename
• tftp: filename
(Optional) Specifies that the command
runs in the background.
189