Show Cfgmgr Trace - Cisco XR 12000 Command Reference Manual

Troubleshooting Commands

show cfgmgr trace

To display trace information for the configuration manager (CFGMGR), use the show cfgmgr trace command
in EXEC mode.
show cfgmgr trace
Syntax Description
This command has no keywords or arguments.
Command Default
No default behavior or values
Command Modes
EXEC
Command History
Release
Release 3.2
Usage Guidelines
Use the show cfgmgr trace command to display cfgmgr trace information.
The following lines of the show cfgmgr trace command output indicate that the startup configuration has
started and that it has completed on the active RP:
Feb
g apply requested with option '0x1'
Feb
g done (and infra band already ready)
These traces are not present if the original active RP has ever reloaded (for example, if there have been
Note
any RP switchover events since the system first booted).
Task ID
Task ID
cisco-support
Examples The following example shows the output of the show cfgmgr trace command:
RP/0/0/CPU0:router#show cfgmgr trace
130 wrapping entries (2048 possible, 0 filtered, 130 total)
Apr 23 21:15:58.587 cfgmgr/common 0/RP0/CPU0 t5
OL-28456-02
6 21:28:37.145 /ltrace/cfgmgr/common 0/RP0/CPU0 t5
6 21:31:30.874 /ltrace/cfgmgr/common 0/RP0/CPU0 t7
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
Modification
This command was introduced.
Startup confi
Startup confi
Operations
read
Req '4': Save interface config]
show cfgmgr trace
41