Show Controllers Plim Asic Ingress-Channel Bay - Cisco XR 12000 Command Reference Manual

show controllers plim asic ingress-channel bay

show controllers plim asic ingress-channel bay
To display statistical information for the SPI4.2 receive channel on a physical layer interface module (PLIM)
ASIC, use the show controllers plim asic ingress-channel bay command in EXEC mode.
show controllers plim asic ingress-channel bay {0| 1} channel channel_number [location node-id]
Syntax Description
0
1
channel
channel_number
location node-id
Command Default
No default behavior or values
Command Modes
EXEC
Command History
Release
Release 3.2
Release 3.5.0
Usage Guidelines
Task ID
Task ID
interface
root-system
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
4
Displays statistical information for the SPI4.2 receive channel that is located in the
bottom bay.
Displays statistical information for the SPI4.2 receive channel that is located in the
top bay.
Identifies the receive channel whose statistics you want to display. Replace the
channel_number argument with the number of the channel whose statistics you
want to display. Range is from 1 through 255.
Identifies the location of the PLIM whose ASIC information you want to display.
The node-id argument is expressed in the rack/slot/module notation.
Note Use the show platform command to see the location of all nodes installed
in the router.
Modification
This command was introduced.
The show controllers plim asic rx-channel baycommand was replaced
by the show controllers plim asic ingress-channel bay command.
ASIC Driver Commands
Operations
read
read
OL-28456-02