Show Tech-Support Gsp - Cisco XR 12000 Command Reference Manual

Tech-Support Commands

show tech-support gsp

To automatically run show commands that display information specific to Gigabit Switch Platform (GSP)
debugging, use the show tech-support gsp command in EXEC mode.
show tech-support gsp [client| group| rack] [location node-id] {terminal [page]| file send-to [background]
[compressed| uncompressed]}
Syntax Description
client
group
rack
location
node-id
terminal
page
file
OL-28456-02
(Optional) Displays the client tech-support information.
(Optional) Displays the group tech-support information.
(Optional) Displays the number of racks
(Optional) Specifies a node.
(Optional) Node ID. The node-id argument is entered in the rack/slot/module
notation.
Displays the command output on the terminal.
(Optional) Displays the command output on a single page at a time. Use the
Return key to display the next line of output or use the space bar to display the
next page of information. If not used, the output scrolls (that is, it does not stop
for page breaks).
Press the Ctrl-C keys to stop the command output.
Specifies that the command output is saved to a specified file.
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
show tech-support gsp
177